cyclone-header1.gif

Acoustic Louvers

Home
Limited Quantities Priced to SELL
NEP Electric Duct Heaters
Superior Radiant Heaters
Plastec Ventilation Inc.
Grilles, Registers And Diffusers
Peerless Radial Blade Blowers
Cincinnati Fan Radial Blade Blowers
2" Fixed Louvers
4" Fixed Louvers
4" Transformer Vault & High Performance Louvers
6" Fixed Louvers
Penthouse Louvers
Brick Vent
Acoustic Louvers
Combination & Operable Louvers
Back Draft Dampers
Aluminum Control Dampers
Steel Control Dampers
Fire Dampers
Centrifugal Roof Exhausters Direct Drive
Centrifugal Roof Exhausters Belt Drive
Centrifugal Wall Exhausters Direct Drive
Centrifugal Filtered Supply Belt Drive
Backward Incline Utility Sets
Centrifugal Square Inline Fans
Axial Hooded Roof Ventilators
Axial Roof Ventilators
Axial Wall Fans Direct Drive
Axial Wall Fans Belt Drive
Ceiling and Inline/Cabinet Fans
Gravity Ventilators
Tube Axial Duct Fans
Centrifugal Inline Duct Fans
Compact Axial & Duct Fans
Air King Circulating Fans
Banvil Ceiling Fans
Vulcain Gas Detection Sensors And Controls
Vibration & Noise Control
Enviro-North Wind Turbines
Xpelair Fans
Engineering & General Information
Contacts Us

ventexlogo.jpg

Model ACL600
Acoustic Louvers

acl.gif

The ACL600 acoustic louver is an extruded aluminum six inch (152 mm) deep louver. Acoustic louvers are used in applications that require noise reduction, as well as ventilation for equipment or machinery. They are commonly used in pumping stations and portable generators.

Construction

 

Depth: 6"

Material: Extruded 6063-T5 Aluminum

Frame Thickness:  5/8" (16 mm)

Frame Styles: Model ACL600 Channel Frame

                    Model ACL605 Flange Frame

Blade Thickness: 1" (25.4 mm)

Blade Angle: 39 degrees

Blade Centers: 5 7/8" (149 mm)

Standard Bird screen: 1/2" x 1/2" re-galvanized 19 ga

Minimum Height: 16" (406 mm)

Maximum Panel Height: 72" (1829 mm)

Maximum Panel Width: 72" (1829 mm)

Free Area (48" x 48"): 4.80 sq. ft.

 

Available Finishes: Mill Finish, Baked Enamel Finish

Model ACL800
Acoustic Louvers

acl.gif

The ACL800 is eight inches (203 mm) deep. The standard construction is aluminum; galvanized steel construction is available as an alternative. Acoustic louvers are used in applications that require noise reduction, as well as ventilation for equipment or machinery. They are commonly used in pumping stations and portable generators.

Construction

Depth: 8"

Material: .63" Aluminum Sheet Formed

Frame Thickness:  5/8" (16 mm)

Frame Styles: Model ACL800 Channel Frame

                    Model ACL805 Flange Frame

Blade Thickness: 4" (100 mm)

Blade Angle: 45 degrees

Blade Centers: 8" (203 mm)

Standard Bird screen: 1/2" x 1/2" re-galvanized 19 ga

Minimum Height: 16" (406 mm)

Maximum Panel Height: 72" (1829 mm)

Maximum Panel Width: 60" (1524 mm)

Free Area (48" x 48"): 4.52 sq. ft.

 

Available Finishes: Mill Finish, Baked Enamel Finish

Model ACL1200
Acoustic Louvers

acl.gif

The ACL1200 is twelve inches (305 mm) deep. The standard construction is aluminum; galvanized steel construction is available as an alternative. These louvers are used in applications that require noise reduction, as well as ventilation for equipment or machinery. They are commonly used in pumping stations and portable generators.

Construction

Depth: 12"

Material: .63 Aluminum Sheet Formed

Frame Thickness:  1" (25.4 mm)

Frame Styles: Model ACL1200 Channel Frame

                    Model ACL1205 Flange Frame

Blade Thickness: 6" (150 mm)

Blade Angle: 45 degrees

Blade Centers: 12" (305 mm)

Standard Bird screen: 1/2" x 1/2" re-galvanized 19 ga

Minimum Height: 24" (610 mm)

Maximum Panel Height: 72" (1829 mm)

Maximum Panel Width: 60" (1524 mm)

Free Area (48" x 48"): 4.07 sq. ft.

 

Available Finishes: Mill Finish, Baked Enamel Finish

Click Here For ACL Submittal Drawing